0.5gpm Ultraviolet water filter for Water Sterilization
Brand Name:coron water filter
Water treatment machine Type:Water Purifier
5 Stage Filtration:No
Purifying Position:Terminal Purification
Time to market:Jun-15
Water Quality Requirements:Municipal Water/Well Water
Type:Water UV disinfection
Flow rate:0.5 gpm (1.9 lpm)
Lamp Dosage:30mJ/cm² @0.5gpm
Lamp power:6 watts
Voltage:110V or 220V ballast
Dimension:50.8x 50.8x 260mm
Body material:SS304 water filter
Coronwater 0.5 gpm Flow Switch UV Disinfection SSE-5215FS
The Coronwater 0.5 gpm UV disinfection systems is designed to assimilate with household, apartment and kitchen, undersink water purification to sterilize bacteria, virus and protozoan in your home water.
Safe water for Family, destroys 99% of illness-causing pathogens bacteria, viruses and protozoan cysts in water.
Disinfects 0.5 gallons per minute of water, perfect to safeguarding water for single faucet, under sink point of use water treatment.
Chemical-free. no add chemical, tastes, odors to water. Waste free and environmentally friendly.
Minimum once a year maintenance. It's easy as changing light bulb by 9,000 hours or 365 days of disinfection.
Ballast Audible alarm, when lamp is in defect.
Flow switch on/off with 600 seconds delay, in order to reduce times of lamp shut-off.
Easy DIY installation. mounting parts and instruction are included (See packing list)
*Chamber is Stainless Steel 304, with 1.5mm thin. It's to ensure Anti-corrosion and pressure toleration under the different application. *Chamber internal construction allow Spiral flow, which is longer water contact time to UV light. *Visual and visible alarm ballast for lamp replacement remind and defect. *Flow switch with 600 seconds delay.
Flow rate 0.5 gpm
Port 1/4" Female
Chamber dimension 50.8mm (Diameter) x 260mm L
Lamp 6W, UVT5-406, Quartz sleeve QT5-425
Flow switch on, and 600's delay switch off
Maximum operating pressure: 8bar (116 psi)
Ambient water temperature: 2 - 40 ℃ (36 - 104 ℉)
Iron < 0.3ppm (0.3 mg / L)
Hardness < 7gpg (120 mg / L)
Turbidity < 1 NTU
UV transmittance > 75%
Maintenance and Replacement
1. UV lamp (UVT5-406), 8000 hours or one year.
2. quartz sleeve. clean at least half year to keep performance. replaced when surface stain can not be cleaned properly. it depends on feed water quality, normally 1-2 year to replace.
3. Silicon O-ring. replace one year.
Certificate of CE, RoHs, UL
Shipping and Packing
1 pcsx 0.5 gpm UV disinfection ( includes chamber, lamp, quartz sleeve)
1 pcs x Ballast
2 pcs x Fittings (elbow 1/4" push in)
2 pcs x Brackets